Description
Triumph TR2-6 wire wheel hub adaptor LH
Also suitable for Triumph Stag
If you are converting from steel wheels to wire wheels (on a Triumph TR) for the first time you will need to reduce the length of the wheel studs to prevent the studs catching the back of the wheels.
Alternatively you can fit a 6mm wheel spacer (see 217602S) behind the hub adaptor, this is a popular option allowing you to easily revert back to steel wheels if required.
| Type | Bolt-on Bolt-on splines, unless fitted as original equipment, will increase the track by approximately 1.25″ per wheel |
| Threads Per Inch (T.P.I.) | 8 |
| Size | 42mm Click here for a guide to identifying hub sizes |
| Number of Stud Holes | 4 |
| P.C.D. | 4½” / 114.3 mm Click here for instructions on measuring PCDs |
| P.C.D. | P.C.D. is the Pitch Circle Diameter and is the diameter of an imaginary circle drawn through the centres of the holes |
| Notes | Click here for a guide to fitting hubs, caps and centre-lock wire wheels |
Reviews
There are no reviews yet.